Skip to content

Categories

Gift ideas All products
Wishlist Service & Contact

Neuigkeiten

Privacy screen for a double rod mesh fence: strips or roll?

· 4 minute read

Sichtschutzrollen für Doppelstabmattenzäune in verschiedenen Farben

A double rod mesh fence keeps dogs and children in the garden, but it doesn't block the view. With plastic privacy strips you can turn the fence into an opaque wall in just a few hours. The question is: ready-cut strips or a roll you cut yourself? And how much do you actually need? In this guide you'll work out your requirements and find the right option.

The key points at a glance

  • Our privacy strips are 19 cm high and fit mesh panels with a 20 cm mesh height.
  • You need one strip per mesh row and fence panel. The number of rows depends on the panel height.
  • Ready-cut strips save you the cutting. The roll is more flexible and comes in more colours.
  • Privacy strips increase the wind load on the fence. Posts and foundations must be able to take it.

1. Will privacy strips fit my fence?

Measure the distance between two horizontal bars on your mesh panel, the mesh height. For most double rod mesh panels, including our ESSENTIAL double rod mesh panels, this is 20 cm. All privacy strips and rolls in our range with a height of 19 cm fit. They do not fit other mesh heights.

2. How to calculate what you need

Count the mesh rows on one panel from bottom to top. For double rod mesh panels with a 20 cm mesh height the rule of thumb is: panel height divided by 20, rounded down. So a 103 cm panel has 5 rows and a 123 cm panel has 6 rows. If in doubt, count the rows on your own panel.

Requirement = number of fence panels × mesh rows per panel. The result is the number of strips. For 200 cm wide panels each strip is just over 2 m long.

Strips per 2 m panel by panel height (rule of thumb, please count on your own panel)
Panel height Mesh rows Strips per panel Panels per 10-strip set
83 cm 4 4 2.5
103 cm 5 5 2
123 cm 6 6 1.7
143 cm 7 7 1.4
163 cm 8 8 1.25
183 cm 9 9 1.1

3. Ready-cut strips: just weave them in

The EXCLUSIVE privacy strips 10 × 2.02 m are cut to fit 200 cm wide panels. One set contains 10 strips and costs €45.90. They come in moss green, anthracite and two-tone combinations such as anthracite/white or anthracite/red. For 250 cm wide panels there are strips 2.53 m long.

Ready-cut strips make sense if you only want to cover a few panels or want to save yourself the cutting.

4. Roll: flexible and more colours

With the roll you cut each strip to length yourself. This also works for leftover panels, gate leaves or unusual panel widths. Our rolls come in three surfaces:

  • Textured, 25.5 m, €45.90, in up to nine colours from anthracite and stone grey to translucent white
  • Grooved, 25.5 m, €42.90, with a grooved structure
  • Perforated, 25.5 m, €57.90, with a perforated pattern

For long fences in anthracite there is also the 50 m roll for €72.90. Allow for some waste when cutting: 25.5 m gives you twelve strips of 2.02 m, 50 m gives you twenty-four.

Example: 10 m fence, 123 cm high, anthracite

  • Panels: 10 m ÷ 2 m = 5 panels
  • Strips: 5 panels × 6 rows = 30 strips of 2.02 m
  • Ready-cut option: 3 sets of 10 strips = €137.70, no cutting needed
  • Roll option: 50 m roll (24 strips) plus 1 set of ready-cut strips (10 strips) = €118.80, with 4 strips to spare

Prices as of November 2026, without promotional discounts. If possible, order everything at once, as shades can vary slightly between production batches.

5. Weaving in: how it works

  1. Start at the bottom and work up row by row.
  2. Weave the strip alternately in front of and behind the vertical bars.
  3. Switch the pattern in the next row so the strips hold each other in place.
  4. Line the ends up flush with the posts. Follow the instructions for each product.

Tip: plastic strips are softer in warm weather and easier to weave in than on cold days.

6. Don't underestimate the wind load

An open mesh fence lets the wind through. With privacy strips it becomes a closed surface and has to withstand much more pressure, especially for tall fences and exposed locations. So plan sufficiently deep foundations and sturdy posts, for example the stronger EXCLUSIVE posts 6×4 cm. For tips on planning posts and panels, see the guide Planning a double rod mesh fence.

Frequently asked questions

How much privacy strip do I need for 20 m of fence?

20 m equals 10 panels. With a panel height of 103 cm you need 10 × 5 = 50 strips, so 5 sets of 10 strips or about 101 m from the roll.

Are the privacy strips opaque?

Most strips are opaque; the translucent white roll lets some light through. There are small gaps between strips and bars. With the perforated roll, some light shines through the pattern.

Can I add privacy strips to the garden gate?

Yes, if the gate infill has the same mesh height. Simply cut strips to size from the roll.

View all privacy screens

Prices and availability as of November 2026. The details on each product page apply.

All articles

Added to your basket

Your basket

Edit basket

Compare products

Compare two to four products from the same product group. The selected versions and their current details are shown.